Have you ever wanted to make a quilt larger than what the pattern says? Or have you ever seen a picture of a block and wanted to reproduce that into a quilt? Most people aren't math crazy like me, so often it's the math that stops us from moving forward with our designs.
This article and the included calculator will show you how to break down a block design into it's smallest pieces that we will call patches. After all, it is a patchwork quilt!
Two Important Notes:
The calculator is based on a usable fabric width of 42". Most likely you can use more of the width but I like to prewash my fabric and cut off the selvages. This gives me the extra I might need.
The amount of fabric needed is the exact amount needed. You should purchase more than this just to be sure.
Start With A Patch
Example 1: A Square
Now we want to see how much fabric we need to cut 27 of these squares. Go to the calculator and enter these three numbers:
I'm working on two scrap quilts using the same block... a 2" x 4" finished rectangle. I ran out of enough variety so I'm cutting more from the mountain of scraps I have.
I used my AccuQuilt 8" Qube rectangle die to cut the 2-1/2" x 4-1/2" rectangles. I have been cutting these from scraps off and on for about a year. After cutting, I put them in a little container from the dollar store.
This was on my bucket list of quilts to make. Many years ago my friend, Ramona, taught a Winding Ways class at Fabrics Etc. in Webster Texas. I didn't take the class but I always admired the sample quilt hanging in the shop.
In this video I show you how to cut the pieces with the AccuQuilt and then piece the blocks. If you don't have an AccuQuilt yet, you can use templates to cut and piece the block the same way I describe in the video.
The Five Oaks Retreat is open and ready for your reservations. For information about the retreat house and to see the booking calendar click here --> The Five Oaks Retreat.
Even though we are ready for your visit, there are still some things we want to do in the next several months. Last week there was a lot going on here:
The studio got some much needed lighting.
Several contractors came by to give us bids on adding an exterior door and remodeling a bathroom.
Update January 10, 2021: This article was originally posted several years ago. Since then I have changed a few things:
I no longer cut my strips 2-1/2" and use a 3/8" seam allowance. Instead, I cut the strips 2" wide and use a 1/4" seam allowance.
Since I use a 1/4" seam allowance now, there is no need to use a walking foot.
I like the look of the narrower binding and not having to change to the walking foot each time.
Many quilters dread the process of attaching a quilt binding. I love to attach bindings because that means the quilt is nearly finished. Here is a tutorial on how I prepare, attach and finish my bindings. The only special tool I use is a walking foot.
Bargello quilts can look intimidating, especially for beginning quilters. The three basic steps to making a bargello quilt are:
sew the horizontal strip sets,
cut the horizontal strip sets into vertical strips, and
sew the vertical strips together.
Once you understand these basic steps, you can make any bargello quilt. In this tutorial we follow the process to make the quilt shown here.This simplified version uses 1/2 yard of 13 fabrics. The quilt finishes approximately 60″ x 76″ without borders.
I use Electric Quilt to design most of my quilts. I found this to be a great tool for auditioning fabric choices. If you are using Electric Quilt, put “bargello” in the search box and find "How Do I Create a Quick Bargello?" to find step-by-step instructions.
Electric Quilt Version
Finished Quilt
Most bargello quilts are pieced in smaller sections or panels. Piece the sections or panels together to make the quilt. In this simplified version, we make three identical panels to sew together.
Prepare the Fabric
First, determine the placement of the fabrics. The colors should flow from one fabric to the next. Some ideas are light ot dark and color groups.
TIP: Lay out the fabrics and take a picture. Try other combinations and take a picture each time. Look at the pictures to determine final placement.
Number the fabrics from 1 thru 13. Next, cut the fabric into strips. From each of the 13 fabrics, cut 6 strips, 2-1/2″ x WOF. This 2-1/2″ width is common in many bargello designs but can vary between designers.
Finally, cut a swatch from each fabric and make a swatch chart like the one shown here.
Step 1 - Sew Horizontal Strip Sets
For this simplified version, a strip set consists of one strip from each fabric. The fabrics are pieced in order from 1 thru 13. For other bargello designs, you may have more or less colors or the colors may be repeated in a strip set.
Tip: To keep the seam lines straight alternate the sewing direction Sew the first two strips together from left to right, sew the next strip right to left and so on.
Press
Press the seams to one side, alternating the pressing direction.
I press from the wrong side.
By alternating the pressing direction, most of the seams will be interlocked when the strips are sewn together in the third step. After pressing, check the front to make sure the pressing is even.
Fold the strip set, right sides together and stitch fabric 1 to fabric 13. This forms a tube. Do not press this seam.
Step 2 – Cut Horizontal Strips into Vertical Strips
With the strip set still folded in half, cut the vertical strips.
Your instructions will have a chart or table showing the width to cut the strips.
For this quilt, there are 5 different cut widths in 1/2″ intervals. Other bargello quilts might have a different number of strips with 1/4″ intervals. Cut the required number of strips for each width. For now, each strip you cut is a loop. Keep the loop intact. Use boxes or bags to sort the loops by width. This will come in handy for the next part of this step.
Loops to Strips
Next you cut the loops apart at various seams. Your instructions will have a chart showing where to remove the stitching. The partial chart below shows how to lay out the panel in columns. Use this chart along with your swatch chart. For Column 1 choose a 2.5″ strip. Remove the stitching between colors 10 and 11. Place this strip on your design wall or table with color 11 at the top.
Here you see some of the columns in place on the design wall. Columns 1-6 are already sewn together. Placing the columns together like this is very important so you can check the design before swing them together in the next step.
Step 3 – Piece Vertical Strips
The last step for this panel is to sew all the vertical strips together. Start at one side and sew the strips together. since you pressed the seams in alternate directions, most of the time your seams will interlock. Change the direction of any seams that need it. Once all the strips are sewn, press the vertical seams in one direction. To complete this quilt, make two more identical panels. Stitch the three panels together.
